Index
Prev
Index
1/4-inch tape drive
preventive maintenance
Quarter-Inch Cartridge Tape Drive Preventive Maintenance
21-inch monitor
Connecting Your Monitor
connection of
Connecting a 21-Inch Monitor
4-mm DAT drive. See DAT drive.
Cleaning the 4-mm DAT and 8-mm Tape Drives
64bit RISC microprocessors
in system
The Onyx Board Set
8-mm tape drive
cleaning
Cleaning the 4-mm DAT and 8-mm Tape Drives
front panel lights
Front Panel Lights
removing jammed cassettes
Removing a Jammed 8-mm Tape Cartridge
address (ID)
on the SCSI bus
Installing and Configuring Additional FLDs
adjustment steps
for your work area
Adjusting Your Chair, Work Surface, and Monitor
airflow
Cooling System
American National Standard Institute
ANSI Standard for VDT Workstations
ASCII terminal
connecting an optional device
Connecting an ASCII Terminal
backups
Software Do's and Don'ts
behavior
faulty operation
System Behavior
of the system
System Behavior
boot process
monitored from the System Controller
The Power-On Process
Boot Status menu
Boot Status Menu
booting a graphics system
Powering On the Onyx Deskside System
bus request levels
VMECC
cartridge tape identification labels
DLT Tape Cartridge Care and Handling
CD-ROM
installing
Installing and Using an Optional CD-ROM
loading software
Installing and Using an Optional CD-ROM
CD-ROM drive
front panel features
CD-ROM Front Panel Operational Features
CD-ROM drives
care and maintenance
CD-ROM Care and Maintenance
chassis cooling
Cooling System
clean the tape drive, instructions
Care and Cleaning of the Exabyte 8-mm Tape Drive
cleaning cartridge
for jukebox tape drive
Care and Cleaning of the Exabyte 8-mm Tape Drive
use of
Digital Linear Tape Maintenance
useful life
Care and Cleaning of the Exabyte 8-mm Tape Drive
cleaning materials
8-mm tape drive
Care and Cleaning of the Exabyte 8-mm Tape Drive
Combiner
InfiniteReality Combiner Programming Overview
GUI
setting display
InfiniteReality Combiner Programming Overview
compact disc
environmental considerations
CD-ROM Environmental Considerations
composite monitor
A Practice Session
composite video ports
RE2 and VTX Graphics Peripherals
InfiniteReality Graphics Peripherals
CPU activity display
The CPU Activity Display
CPU activity graph
Using the System Controller
DAT drive
capacities
4-mm DAT Drive
cleaning
Cleaning the 4-mm DAT and 8-mm Tape Drives
data transfer rate
4-mm DAT Drive
front panel lights
Front Panel Lights
loading and unloading cassettes
Loading and Unloading Cassettes
removing jammed cassettes
Removing a Jammed 4-mm Cassette
data compression
Digital Linear Tape Maintenance
daughter boards
SCSI Limitations
default video format
Connecting a 21-Inch Monitor
defective microprocessors
The Power-On Process
differential SCSI
use of
SCSI Configuration
disk controllers
SCSI-2 Interface
DLT cartridge care and handling
DLT Tape Cartridge Care and Handling
DLT cleaning cartridge
Digital Linear Tape Maintenance
drive sled
mounting to drive
Installing a Half-Height FLD
Ebus
Features
Main System Bus
electrostatic discharge (ESD)
Electrostatic Discharge
ergonomic work environment
Tips for Setting Up and Using Your Workstation
Ethernet
optional connections
Connecting the System to an Ethernet
Ethernet Interface
Ethernet Interface
external appearance of the Onyx chassis
Touring the Chassis
external SCSI connector
Installing External SCSI Devices
fans
Cooling System
fault LED
on System Controller
The Power-On Process
FCI Interfaces
description of
Flat Cable Interface (FCI)
front door
opening of
Opening the Front Door
front loading device
installing a full-height device
Installing a Full-Height FLD
removal of
Removing an FLD
front loading devices
overview
Internal Front-Loading Drives
front-loading devices
configuring
Installing and Configuring Additional FLDs
front-loading SCSI device
installing
SCSI Configuration
full-height front-loading device
installation
Installing a Full-Height FLD
GE processors
Geometry Engine (GE10) Board
Geometry Engine board
The RealityEngine2 and VTX Graphics Subsystem
graphics interface
shutdown of
Recovering From a System Crash
guidelines
for a productive work environment
Human Factors Guidelines for Setting Up Your Workstation
half-height front-loading device
installing
Installing a Half-Height FLD
halt operating system
Powering Off the Onyx Deskside System
hardware
do's and don'ts
Maintaining Your Hardware and Software
maintenance of
Hardware Do's and Don'ts
histogram
The CPU Activity Display
i-Station
The Onyx Board Set
I/O panel
accessing
Opening the Front Door
Ibus
The Onyx Board Set
Ibus
interfaces
Ibus Interface
InfiniteReality
The Graphics Subsystems
information options
on the System Controller
System Controller On Functions
installing devices
front-loading SCSI device
SCSI Configuration
IO4
list of features
The Onyx Board Set
IO4 mezzanine daughter boards
Features
IP19 CPU board
Features
IP21 CPU board
Features
ircombine
InfiniteReality Combiner Programming Overview
key switch
on the System Controller
System Controller On Functions
keyboard
Connecting Your Keyboard and Mouse
installing
Connecting Your Keyboard and Mouse
logged errors
in System Controller
Using the System Controller
maintenance
Maintaining Your Hardware and Software
limitations
Getting Started
Manager key
Using the System Controller
MC3 memory board
The Onyx Board Set
Mezzanine Boards
VMEbus Channel Adapter Module (VCAM) Board
microprocessors disabled
The Power-On Process
modem
connections of
Connecting a Modem
pin assignments
Connecting a Modem
mouse
installing
Connecting Your Keyboard and Mouse
noise
on the SCSI bus
Installing and Configuring Additional FLDs
NTSC
A Practice Session
NVRAM
System Controller On Functions
NVRAM log file
The Event History Log Menu
Offline switcher (OLS)
Power Supplies
opening the front door
Opening the Front Door
operating procedures
Chassis Components
operating protocols
of drives
Internal Front-Loading Drives
options
list of
Features
OVER TEMP condition
Using the System Controller
PAL
A Practice Session
parallel port
Parallel Port
parallel printer
connection of
Connecting a Parallel Printer
pin assignments
Connecting a Parallel Printer
using the LP spooling system
Connecting a Parallel Printer
parallel printer port
Parallel Printer Port
physical inspection
checklist
System Behavior
physical location
requirements for chassis
Operating Considerations
power boards
Using the System Controller
power on
the system
Powering On the Onyx Deskside System
power receptacle
Power Supplies
power specifications
Hardware Specifications
power supply
upgrade of
The Onyx Board Set
power switches
Powering On the Onyx Deskside System
POWERchannel-2
Features
powered
Powering Off the Onyx Deskside System
powered peripherals
Serial and DIN Connectors
powering off the system
Powering Off the Onyx Deskside System
POWERpath-2 interleaved memory board
The Onyx Board Set
POWERpath-2 system bus
Features
ranges of adjustment
in the work environment
CAD Operator Preferences
Raster Memory
Raster Memory (RM4) Board
RealityEngine2
features of
The Graphics Subsystems
reboot
command
Rebooting Your System
recovery
after system corruption
Recovery After System Corruption
rotary blower. See cooling system.
Cooling System
RS-232 standard
Serial and DIN Connectors
SCSI
terminators
SCSI Configuration
SCSI bus
fast and wide
SCSI Configuration
malfunction
SCSI Configuration
SCSI cable length
SCSI Limitations
SCSI channel
A or B
Installing and Configuring Additional FLDs
SCSI devices
rules for installation
SCSI Configuration
SCSI drive backplane
terminators for
SCSI Limitations
SCSI drive rack
location of
SCSI Drive Rack
SCSI protocols
SCSI Configuration
SCSI-2 controllers
SCSI-2 Interface
serial ports
Serial Ports
commands and configuration
Helpful Serial Port Commands
serial printer
connection of
Connecting a Serial Printer
LP spooling
Connecting a Serial Printer
setup example
Connecting a Serial Printer
software
do's and don'ts
Software Do's and Don'ts
maintenance of
Software Do's and Don'ts
specifications
for the 21-inch monitor
Hardware Specifications
physical, electrical, and environmental
Hardware Specifications
standard I/O interface and graphics connectors
The I/O Panel
standard monitor
Connecting Your Monitor
status messages
The Power-On Process
system behavior
identifying problems
System Behavior
System Controller
basic use
Using the System Controller
battery backup
System Controller
bringing up the system
The Power-On Process
control buttons
System Controller On Functions
dectection of a fault condition
System Controller On Functions
errors recorded
System Controller On Functions
event history message tables
System Error Messages
front panel location
System Controller
general description
System Controller
hang during power up
If the System Hangs
LEDs
System Controller On Functions
On position functions
System Controller On Functions
power-on hang
If the System Hangs
System Controller internal errors
The Event History Log Menu
system crash
recovering from
Recovering From a System Crash
System error messages
The Event History Log Menu
System events
The Event History Log Menu
tape drive, cleaning
Care and Cleaning of the Exabyte 8-mm Tape Drive
Terminal
connecting an ASCII device
Connecting an ASCII Terminal
TFP
Features
unload button, on tape drive
Care and Cleaning of the Exabyte 8-mm Tape Drive
user-serviceable parts
Getting Started
using the keyboard
System Usage
VCAM Boards
VMEbus Channel Adapter Module (VCAM) Board
VCR
A Practice Session
VDT workstation adjustment
ANSI Standard for VDT Workstations
video options
RE2 and VTX Video Out Panel Overview
Video Out Panel
capturing images
A Practice Session
practice session
A Practice Session
starting
RE2 and VTX Video Out Panel Overview
video peripherals
connection of
Video Peripherals
video signals
RE2 and VTX Video Out Panel Overview
VME
conventions supported
Power Supplies
VME board
power budget limits
Power Supplies
VME expansion
System and SCSI Backplanes
VME interface
description of
VMEbus Interface
VTX board set
The Onyx Board Set
Vulcan Death Grip
Recovering From a System Crash
work environment
comfort and safety
Human Factors Guidelines for Setting Up Your Workstation