List of Tables

| Table of Contents | List of Figures | List of Tables |

Table 1-1. Required Air Clearances for the Deskside Chassis

Table 2-1. InfiniteReality Graphics Connectors

Table 2-2. Standard I/O Connectors

Table 2-3. Standard Connectors With RE2 and VTX

Table 2-4. Centronics Compatible Parallel Port Pin Assignments

Table 3-1. 21-Inch Front-Panel Monitor Controls

Table 3-2. Preset Viewing Modes for the 21-Inch Monitor

Table 3-3. System Controller Boot Status Messages

Table 3-4. Options on the Controls Menu

Table 3-5. Options on the Options Menu

Table 4-1. Overview of Drive Installation Guidelines

Table 4-2. 68-Pin Single-Ended, High-Density SCSI Pinouts

Table 4-3. 68-Pin Differential, High-Density SCSI Pinouts

Table 4-4. Typical DTE to DTE Serial Printer Connection

Table 4-5. Typical ASCII Terminal Connection

Table 4-6. RS-232 Modem Connector Pin Assignments

Table 4-7. Centronics Compatible Parallel Port Pin Assignments

Table 5-1. System Controller Master CPU Status Messages

Table 6-1. ANSI/HFS 100–1988 Guidelines for VDT Workplace Adjustment

Table 6-2. Workstation Adjustments Preferred by CAD Users

Table A-1. Onyx Deskside Graphics Workstation Specifications

Table A-2. Onyx 21-Inch Monitor Specifications

Table B-1. 4-mm DAT Front Panel LED Status Indicators

Table B-2. LED States and Interpretations

Table C-1. System Error Messages

Table C-2. System Event Messages

Table C-3. Internal System Controller Error Messages

Table D-1. Optional Mezzanine Board Descriptions

Table E-1. Supported Address and Data Sizes

Table E-2. Word Length Conventions

Table E-3. Deskside Onyx VME Power Use Example

Table E-4. Onyx InfiniteReality and i-Station VME Power

Table E-5. Onyx RealityEngine2 and VTX Deskside Board Slot Locations

Table E-6. Onyx InfiniteReality and i-Station Deskside Board Slot Locations

Table E-7. P1 VME Pin Assignments

Table E-8. P2 VME Pin Assignments

Table E-9. P3 VME Pin Assignments

Table E-10. Signal Definitions