List of Figures

| Table of Contents | List of Figures | List of Tables |

Figure 2-1. Video Format Combiner Main Window

Figure 2-2. Select Format Window

Figure 2-3. Video Format Specified for Channel 0

Figure 2-4. Channel Attributes Window

Figure 2-5. Stacked Field Layout

Figure 2-6. Framebuffer

Figure 2-7. Run-Time Panning and Tile Boundaries

Figure 2-8. Combination Attributes Window

Figure 2-9. Channel Attributes Window

Figure 2-10. Combination Attributes Window

Figure 2-11. Framebuffer and Pixel Depth

Figure 2-12. Target Hardware Window

Figure 3-1. Encoder, Roaming in Channel 0

Figure 3-2. Encoder Channel Attributes Window

Figure 3-3. Varying the Width of the Filter

Figure 4-1. Sirius Video Channel Attributes Window

Figure 4-2. DVP Channel Attributes Window

Figure 4-3. GVO Channel Attributes Window

Figure A-1. Combiner Main Window

Figure A-2. Selecting a Channel Format

Figure A-3. Channel Attributes Window

Figure A-4. Combiner Main Window With Channels 0 and 1

Figure A-5. Combination Attributes Window

Figure A-6. Textport Error Message on the Main Window

Figure A-7. Combiner Main Window With Overlapping Channels

Figure A-8. Saving to Hardware Dialog Box

Figure A-9. Exit Warning Dialog Box

Figure A-10. Static Resize Selection

Figure A-11. Save a Combination

Figure 30. Color Burst and Chrominance Signal

Figure 31. Component Video Signals

Figure 32. Horizontal Blanking

Figure 33. Horizontal Blanking Interval

Figure 34. Waveform Monitor Readings With and Without Setup

Figure 35. Red or Blue Signal

Figure 36. Y or Green Plus Sync Signal

Figure 37. Video Waveform: Composite Video Signal With Setup (Typical NTSC)

Figure 38. Video Waveform: Composite Video Signal (Typical PAL)