List of Figures
| Table of Contents | List of Figures | List of Tables |
- Figure 1-1. Origin Vault Standalone Tower, Front View
- Figure 1-2. Example Rackmounted Origin Vault Enclosure
- Figure 1-3. Drive Bay Locations
- Figure 1-4. Origin Vault Rackmountable Enclosure Rear View (Differential)
- Figure 1-5. Origin Vault Rackmountable Enclosure Rear View (Single-Ended)
- Figure 1-6. Origin Vault Standalone Tower Rear View
- Figure 1-7. 3.5-Inch Drive, Sled, and Bay
- Figure 1-8. Air Flow Through the Origin Vault Tower
- Figure 1-9. Main Power Switch (Circuit Breaker) and Power Button
- Figure 1-10. Origin Vault Configuration (Single-Ended Only)
- Figure 1-11. Origin Vault Configurations (Differential Only)
- Figure 2-1. Rackmountable Origin Vault Enclosure
- Figure 2-2. Removing Tower Side Panels
- Figure 2-3. Removing the Origin Vault Cover
- Figure 2-4. Attaching the Grounding Strap
- Figure 2-5. SCSI Device ID Jumper and Pins
- Figure 2-6. Setting 3.5-Inch Drive Device Numbering to 9 through 14
- Figure 2-7. Mounting Ears
- Figure 2-8. Attaching Mounting Ears
- Figure 2-9. Example Origin Vault Enclosures in Origin2000 Rack
- Figure 2-10. Rail Placement for Origin Vault Enclosure in an Origin2000 Rack
- Figure 2-11. Rack Brackets (Mounting Ears)
- Figure 2-12. Attaching Rack Brackets
- Figure 2-13. Installing the Rackmounting Shelf in a P-S-RACK or 19-Inch Industry-Standard Rack
- Figure 2-14. Lifting the Origin Vault Enclosure Into a Rack
- Figure 2-15. Attaching End Caps (P-S-RACK)
- Figure 2-16. Installing Faceplate and Door: Origin2000 Rack
- Figure 2-17. Removing Faceplate and Door: Origin2000 Rack
- Figure 2-18. Removing Faceplate and Door: Third-Party 19-Inch Rack
- Figure 2-19. Origin Vault Rackmountable Enclosure Rear View
- Figure 2-20. Connecting the Rackmount Power Cable
- Figure 2-21. PCI SCSI Option Board Icons
- Figure 2-22. Connecting the Rackmount SCSI Cable to an Origin2000 Host: Single-Ended Only
- Figure 2-23. Connecting the Rackmount SCSI Cable to an Origin2000 Host: Differential Only
- Figure 2-24. Connecting the Rackmount SCSI Cable to a Host (Not in Same Rack)
- Figure 2-25. Turning Off the Main Power Switch
- Figure 2-26. Removing a Blanking Panel for a 3.5-Inch Drive
- Figure 2-27. Inserting a 3.5-inch Drive, Standalone Tower
- Figure 2-28. Inserting a 3.5-inch Drive, Rackmountable Enclosure
- Figure 2-29. Unscrewing the Peripheral Carrier
- Figure 2-30. Removing Peripheral Carrier EMI Shielding Plate
- Figure 2-31. Removing a Peripheral Carrier Blanking Plate
- Figure 2-32. Attaching a Power Cable Connector to a Peripheral Inside the Carrier (Example)
- Figure 2-33. Attaching a SCSI Connector to a Peripheral Inside the Carrier (Example)
- Figure 2-34. Securing a Peripheral in the Carrier
- Figure 2-35. Inserting the Peripheral Carrier Into the 5.25-Inch Bay
- Figure 2-36. Origin Vault Standalone Tower Rear View
- Figure 2-37. PCI SCSI Option Board Icons
- Figure 2-38. Origin Vault and Origin2000 Host (Differential)
- Figure 2-39. Origin Vault and Origin200 Host (Differential)
- Figure 2-40. Single-Host, Dual-Option: Daisy Chaining
- Figure 2-41. Origin2000 System and Daisy-Chained Origin Vault Options
- Figure 2-42. Dual-Host, Single-Option Configuration
- Figure 2-43. Dual-Hosted Configuration Sharing One Origin Vault Option
- Figure 2-44. Dual-Host, Dual-Option Configuration
- Figure 2-45. Dual-Hosted Configuration Sharing Two Origin Vault Options
- Figure 2-46. Main Power Switch
- Figure 3-1. Main Power Switch
- Figure 3-2. Locking the Origin Vault
- Figure 3-3. Removing a 3.5-Inch Disk, Standalone Tower
- Figure 3-4. Removing a 3.5-Inch Disk, Rackmountable Enclosure
- Figure 3-5. Unscrewing the Peripheral Carrier
- Figure 3-6. Removing Peripheral Carrier EMI Shielding Plate
- Figure 3-7. Unscrewing a Peripheral
- Figure 3-8. Detaching a SCSI Connector From a Peripheral Inside the Carrier: Example
- Figure 3-9. Detaching a Power Cable Connector From a Peripheral: Example
- Figure 3-10. Adjusting the Feet
- Figure 4-1. Rackmountable Origin Vault Option
- Figure 4-2. Removing Tower Side Panels
- Figure 4-3. Removing the Origin Vault Cover
- Figure 4-4. Attaching the Grounding Strap
- Figure 4-5. Cable Connections and Spring Clips on SCSI Backplane
- Figure 4-6. Disconnecting the Fan and Fan Power Cable
- Figure 4-7. Removing the Fan From the System
- Figure 4-8. Detaching Cables From the Converter Board and Carrier
- Figure 4-9. Unscrewing the Converter Board Carrier: Two Views
- Figure 4-10. Unscrewing the Converter Board
- Figure 4-11. Removing the Crossbar (Origin Vault Standalone Tower)
- Figure 4-12. Detaching the System Controller Carrier From the Front of the Chassis
- Figure 4-13. Detaching the System Controller Board From the Carrier
- Figure 4-14. Power Supply Button
- Figure 4-15. Removing the Power Supply