The Silicon Graphics 320 visual workstation conforms to several national and international specifications and European Directives listed on the “Manufacturer's Declaration of Conformity.” The CE insignia displayed on each device is an indication of conformity to the European requirements.
 | Caution: Your Silicon Graphics 320 visual workstation has several governmental and third-party approvals, licenses, permits. Do not modify this product in any way that is not expressly approved by Silicon Graphics. If you do, you may lose these approvals and your governmental agency authority to operate this device. |
The model number, or CMN number, for the Silicon Graphics 320 visual workstation is CMNB021. It's located on the system label above the power connector and voltage switch on the back of the workstation.
The series number denotes the speed of the processor. The number begins with BH and is followed by the processor speed. For example, the series number for a 400 MHz processor is BH400. The series number is located on the barcode label on the back of the workstation.
You need to know the CMN and series numbers for downloading the Manufacturer's Declaration of Conformity from the World Wide Web. You also need to know the CMN number to determine the class of your Silicon Graphics 320 workstation.
A “Manufacturer's Declaration of Conformity” is available on the World Wide Web. Look on your system (regulatory) label on the rear of your workstation to determine your CMN (model) number, which you need to identify your Declaration of Conformity, and to find the Series Number of your processor.
To locate the information on the World Wide Web, enter the following in your Web browser location window:
http://www.sgi.com/compliance/index.html |
The following information is provided about the device covered in this manual in compliance with FCC regulations.
Trade Name | Silicon Graphics, Inc. |
Product | Windows NT workstation |
Model Number | CMNB021 |
Date of Conformance | January 1999 |
Responsible Party | Silicon Graphics, Inc. |
Address | 2011 N. Shoreline Blvd. |
Telephone | (650)960-1980 |
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with the Class B limits of Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.
Also, this device complies with Class B electromagnetic emissions limits of C.I.S.P.R. Publication 22, Limits and Methods of Measurement of Radio Interference Characteristics of Information Technology Equipment.
The Silicon Graphics 320 visual workstation is FCC-compliant under test conditions that include the use of shielded cables between the workstation and its peripherals. Silicon Graphics 320 and any peripherals you purchase from Silicon Graphics have shielded cables. Shielded cables reduce the possibility of interference with radio, television, and other devices. If you use any cables that are not from Silicon Graphics, make sure they are shielded. Telephone cables do not need to be shielded.
The monitor cable supplied with your system uses additional filtering molded into the cable jacket to reduce radio frequency interference. Always use the cable supplied with your system. If your monitor cable becomes damaged, a replacement cable should be obtained from Silicon Graphics.
Silicon Graphics designs and tests its products to be immune to the effects of electrostatic discharge (ESD). ESD is a source of electromagnetic interference and can cause problems ranging from data errors and lockups to permanent component damage.
While operating your Silicon Graphics 320, it is important that you keep all the covers and doors, including the plastics, in place. The shielded cables that came with the Silicon Graphics 320 and its peripherals should be installed correctly, with all thumbscrews fastened securely.
Cet appareil numérique n'émet pas de perturbations radioélectriques dépassant les normes applicables aux appareils numériques de Classe B préscrites dans le Règlement sur les interferences radioélectriques établi par le Ministère des Communications du Canada.
Marking by the “CE” symbol indicates compliance of the device to directives of the European Community. A “Declaration of Conformity” in accordance with the above standards has been made and is available from Silicon Graphics upon request.
La información siguiente se proporciona en el dispositivo o en dispositivos descritos en este documento, en cumplimiento con los requisitos de la Norma Oficial Mexicana (NOM 024):
Exportador: | Silicon Graphics, Inc. |
Importador: | Silicon Graphics, Inc. |
Embarcar a: | Av. Vasco de Quiroga |
Tensión alimentación: | 100-120/200-240 V~ |
Frecuencia: | 50/60 Hz |
Consumo de corriente: | 6.5/3.5 A |
Silicon Graphics (“SG”) warrants to the original purchaser of this SG hardware product (the “Product”) that it will be free from defects in material and workmanship for a period of three (3) years after the date of its original purchase (the “Warranty Period”). Product will be of new manufacture, but may include used parts and/or components that match or exceed the performance and reliability of new parts and/or components.
If you discover a defect in any Product during the Warranty Period, SG will repair, or at SG's option replace, such Product at no charge to you, provided that you (i) promptly provide notice of the defect to an SG service center or authorized SG service provider in the country where you purchased the Product, (ii) include with such notice a copy of your bill of sale or packing list for the Product, bearing the applicable SG serial number as proof of the original date and location of your purchase, and (iii) return such defective Product freight pre-paid to SG or an authorized SG service provider, as applicable. Product or components thereof replaced by SG will become the property of SG.
This warranty applies only to Product that you purchased from SG or an authorized SG reseller, that SG or its authorized service provider determines to be defective. This warranty does not apply to (a) software installed on or accompanying the Product, which is licensed to you under a separate agreement included with such software, (b) the Silicon Graphics 1600SW Flat Panel monitor or other flat panel monitors, which are provided under separate warranty, (c) Product that has been damaged by abuse, accident, act of God, misuse, misapplication, improper installation or shipment or the like, or (d) Product that has been modified or on which the serial number has been removed or altered. YOU ARE SOLELY RESPONSIBLE FOR BACKING UP YOUR SOFTWARE AND DATA ON AN ONGOING BASIS AND BEFORE THE PRODUCT IS REPLACED OR REPAIRED. SG, ITS RESELLERS AND AUTHORIZED SERVICE PROVIDERS WILL NOT BE LIABLE TO YOU FOR ANY LOSS OF OR DAMAGE TO SOFTWARE, DATA OR REMOVABLE STORAGE MEDIA.
THE FOREGOING WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY BY THE PRODUCT. THIS WARRANTY IS IN LIEU OF, AND SG DISCLAIMS, ALL OTHER WARRANTIES, EXPRESS, IMPLIED, STATUTORY OR OTHERWISE, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY SG, OR ITS RESELLERS, DEALERS, DISTRIBUTORS, OR AUTHORIZED SERVICE PROVIDERS WILL CREATE A DIFFERENT WARRANTY OR CHANGE THE TERMS OF THIS WARRANTY.
SG SHALL NOT BE LIABLE FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES OF ANY KIND (INCLUDING WITHOUT LIMITATION LOSS OF PROFITS, USE, DATA, SOFTWARE, GOODWILL OR PROPERTY DAMAGE), WHETHER OR NOT SG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSS, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, ARISING OUT OF THE USE OF THE PRODUCT, OR RESULTING FROM A BREACH OF THIS WARRANTY. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING THE FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.