This appendix summarizes
Table A-1 summarizes the Fiber-Optic and Copper board physical characteristics.
Table A-1. Gigabit Ethernet Adapter Board Specifications
| Feature | Value |
|---|---|---|
Dimensions | Length | 6.60 inches |
Performance | Maximum PCI clock rate | 33 MHz |
| PCI data burst transfer rate | 132 MBps |
| PCI/Data/address | 32-bit and 64-bit |
| PCI modes | Master/slave |
Power requirements | Maximum consumption (fiber) | 14 watts |
| Maximum consumption (copper) | 14 watts |
Table A-2 provides the Fiber-Optic board and Copper board environmental specifications.
Table A-2. Environmental Specifications
Condition | Operating Specification | Storage Specification |
|---|---|---|
Temperature | 0˚ to 55˚ C (32˚ to 131˚ F) | -40˚ to +85˚ C (-40˚ to +185˚ F) |
Relative humidity | 5 to 85% noncondensing 40˚ C (104˚ F), 16 hour dwells at extremes | 5 to 95% noncondensing 10˚ C/hour |
Altitude | Up to 3048 m (10,000 feet) | Up to 10668 m (35,000 feet) |
Shock | 10g, 1/2 sine wave, 11 msec | 60g, 1/2 sine wave, 11 msec |
Vibration, peak-to-peak displacement | 0.005 in. max (5 to 32 Hz) | 0.1 in. max (5 to 17 Hz) |
Vibration, peak acceleration | 0.25g (5 to 500 Hz) (sweep rate = | 0.25g (5 to 500 Hz) (sweep rate = |
Table A-3 lists operating ranges for connecting to 1000-BASE-SX and 1000-BASE-LX ports as defined by the IEEE 802 LAN/MAN Standards Committee.
Table A-3. Fiber-Optic Operating Range
Standard | Fiber Type | Diameter (Microns) | Modal Bandwidth (MHz * km) | Range (Meters) |
|---|---|---|---|---|
1000-BASE-SX | MM | 62.5 | ||
1000-BASE-LX | MM | 62.5 | 2 to 550 | |
[a] The TIA 568 building wiring standard specifies 160/500 MHz * km multimode fiber. [b] The international ISO/IEC 11801 building wiring standard specifies 200/500 MHz * km multimode fiber. [c] The ANSI Fibre Channel specification specifies 500/500 MHz * km 50 micron multimode fiber and 500/500 MHz * km fiber has been proposed for addition to ISO/IEC 11801. | ||||