- 3.5-inch drive
- 3.5-Inch Disk Drives
- configuring
- Configuring Drives
- connector
- Drive Controller Connectors
- differential
- cabling rackmounted
- Cabling the Differential 3.5-Inch Drive Controller
- cabling tower
- Cabling the Tower
- drive bay location
- Drive Bay Locations
- in, out
- Drive Controller Connectors
- installing
- Installing 3.5-Inch Drives
- verifying
- Verifying Drive Installation
- labels
- Drive Controller Connectors
- LEDs
- Drive LEDs
- marketing codes
- 3.5-Inch Disk Drives
- not from Silicon Graphics
- Installing 3.5-Inch Drives
- numbering
- 3.5-Inch Disk Drives
- 3.5-Inch Disk Drives
- replacing and adding
- Replacing and Adding a Disk Drive Module
- single-ended
- cabling rackmounted
- Cabling the Single-Ended 3.5-Inch Drive Controller
- cabling tower
- Cabling the Tower
- sled
- 3.5-Inch Disk Drives
- speed
- Data Transfer Rates
- termination
- Drive Controller Connectors
- Drive Controller Connectors
- Drive Termination
- warm swap
- Warm Swapping Drives (Administrative Warm Swap)
- 5.25-inch drive
- 5.25-Inch Drives
- cabling
- rackmounted
- Cabling the 5.25-Inch Drive Controller
- tower
- Cabling the Tower
- configuring
- Configuring Drives
- connector
- Drive Controller Connectors
- drive bay location
- Drive Bay Locations
- installing
- Installing 5.25-Inch Options
- verifying
- Verifying Drive Installation
- LEDs
- Drive LEDs
- numbering
- 3.5-Inch Disk Drives
- 3.5-Inch Disk Drives
- removing and adding
- Removing and Adding a 5.25-Inch Drive Option
- single-ended
- Single-Ended and Differential Versions (3.5-Inch Drive Controller)
- speed
- Data Transfer Rates
- termination
- Drive Termination
- Drive Controller Connectors
- administrative warm swap
- 3.5-Inch Disk Drives
- Warm Swapping Drives (Administrative Warm Swap)
- cables
- Configurations and Cabling for the 3.5-Inch Drive Controller
- configuration
- Configurations and Cabling for the 3.5-Inch Drive Controller
- converter board, replacing
- Replacing the Differential/Single-Ended Converter Board
- daisy chaining
- Adding a Second Origin Vault Expansion Option (One Host)
- Adding a Second Host and Second Origin Vault Expansion Option
- 5.25-inch drive
- Drive Controller Connectors
- data rate
- Data Transfer Rates
- differential
- Single-Ended and Differential Versions (3.5-Inch Drive Controller)
- Cabling the Enclosure
- cabling
- rackmounted
- Cabling the Differential 3.5-Inch Drive Controller
- tower
- Cabling the Tower
- configuration
- Configurations and Cabling for the 3.5-Inch Drive Controller
- termination
- Drive Termination
- differential/single-ended converter board, replacing
- Replacing the Differential/Single-Ended Converter Board
- disk module
- ordering
- 3.5-Inch Disk Drives
- Origin200, Origin2000
- 3.5-Inch Disk Drives
- single-ended
- Single-Ended and Differential Versions (3.5-Inch Drive Controller)
- DLT tape drive, installing
- Installing the Drive(s) and the Peripheral Carrier
- drive
- numbering
- 3.5-Inch Disk Drives
- See also 3.5-inch drive, 5.25-inch drive.
- Data Transfer Rates
- speeds
- Data Transfer Rates
- end cap
- Installing the Origin Vault Enclosure in a Rack
- Removing the Enclosure Door (Optional)
- Securing the Enclosure in the Rack
- fan, replacing
- Replacing a Fan
- feet, adjusting (swivelling)
- Adjusting the Feet
- grounding strap
- Jumpering SCSI Device IDs
- hot-pluggability
- Replacing and Adding a Disk Drive Module
- label, attaching to bottom-opening door
- Securing the Enclosure in the Rack
- LED
- drives
- Drive LEDs
- power
- Powering Off the Origin Vault Expansion Option
- manuals, others needed
- Structure of This Guide
- mounting
- ears
- Preparing the Enclosure for the Origin2000 Rack or P-S-RACK
- Installing the Origin Vault Enclosure in a Rack
- See also rack brackets
- Installing the Origin Vault Enclosure in a Rack
- shelf
- Installing the Origin Vault Enclosure in a Rack
- installing
- Installing the Mounting Shelf
- Origin Vault
- air flow
- Operating Conditions
- cabling to second host
- Adding a Second Host to One Origin Vault Expansion Option
- formats
- Origin Vault Formats
- operating conditions
- Operating Conditions
- powering off
- Powering Off the Origin Vault Expansion Option
- preparing for component replacement
- Preparing the Option for Component Replacement
- rackmounted
- Origin Vault Formats
- cabling
- Cabling the Enclosure
- door
- Installing the Origin Vault Enclosure in a Rack
- door:attaching
- Securing the Enclosure in the Rack
- power cord connection
- Connecting to the Power Distribution Unit
- securing in rack
- Securing the Enclosure in the Rack
- second, cabling
- Adding a Second Origin Vault Expansion Option (One Host)
- with second host
- Adding a Second Host and Second Origin Vault Expansion Option
- tower
- Origin Vault Formats
- cabling
- Cabling the Tower
- clearances
- Choosing a Location for the Origin Vault Tower
- Operating Conditions
- location
- Choosing a Location for the Origin Vault Tower
- power circuit with Origin200
- Operating Conditions
- Choosing a Location for the Origin Vault Tower
- power cord connection
- Cabling the Tower
- powering on
- Turning On the Origin Vault Expansion Option
- removing cover
- Jumpering SCSI Device IDs
- removing side panels
- Jumpering SCSI Device IDs
- unpacking
- Unpacking the Origin Vault
- Origin200
- cabling
- to rackmounted
- Cabling the Differential 3.5-Inch Drive Controller
- to tower
- Cabling the Tower
- two to one Origin Vault
- Adding a Second Host to One Origin Vault Expansion Option
- two to two Origin Vaults
- Adding a Second Host and Second Origin Vault Expansion Option
- power circuit
- Cabling the Tower
- Choosing a Location for the Origin Vault Tower
- Operating Conditions
- rackmounted
- installing
- Installing the Origin Vault Enclosure in a Rack
- Origin2000
- cabling
- to rackmounted
- Cabling the 5.25-Inch Drive Controller
- Cabling the Differential 3.5-Inch Drive Controller
- to tower
- Cabling the Tower
- Cabling the Tower
- two to one Origin Vault
- Adding a Second Host to One Origin Vault Expansion Option
- two to two Origin Vaults
- Adding a Second Host and Second Origin Vault Expansion Option
- SCSI connector
- Cabling the Enclosure
- Origin2000 Rack
- installing Origin Vault in
- Securing the Enclosure in the Rack
- Installing the Origin Vault Enclosure in a Rack
- removing Origin Vault door
- Removing the Enclosure Door (Optional)
- other manuals needed
- Structure of This Guide
- P-S-RACK, installing Origin Vault in
- Preparing the Enclosure for the Origin2000 Rack or P-S-RACK
- Installing the Origin Vault Enclosure in a Rack
- Securing the Enclosure in the Rack
- PCI SCSI option
- Cabling the Differential 3.5-Inch Drive Controller
- Cabling the Single-Ended 3.5-Inch Drive Controller
- Cabling the 5.25-Inch Drive Controller
- Cabling the Tower
- peripheral carrier
- installing drives in
- Installing the Drive(s) and the Peripheral Carrier
- preparing
- Preparing the Peripheral Carrier
- reinserting into bay
- Installing the Drive(s) and the Peripheral Carrier
- power
- button
- Main Power Switch and Power Button
- Powering Off the Origin Vault Expansion Option
- Turning On the Origin Vault Expansion Option
- cord, connecting
- rackmounted
- Connecting to the Power Distribution Unit
- tower
- Cabling the Tower
- LED
- Powering Off the Origin Vault Expansion Option
- supply
- checking
- Checking the Power Supply
- replacing
- Replacing the Power Supply
- switch
- Installing 3.5-Inch Drives
- Main Power Switch and Power Button
- Turning On the Origin Vault Expansion Option
- Powering Off the Origin Vault Expansion Option
- rack brackets
- Installing the Origin Vault Enclosure in a Rack
- Attaching Rack Brackets to the Enclosure
- See also mounting ears.
- Installing the Origin Vault Enclosure in a Rack
- rackmountable enclosure. See Origin Vault rackmounted.
- Features of the Origin Vault Expansion Option
- safety considerations
- Safety Considerations
- SCSI
- backplane, replacing
- Replacing the SCSI Backplane
- cabling
- rackmounted
- Cabling the Single-Ended 3.5-Inch Drive Controller
- tower
- Cabling the Tower
- channel agreement
- Cabling the Tower
- Cabling the Enclosure
- connectors
- Drive Controller Connectors
- rackmounted
- Cabling the Enclosure
- tower
- Cabling the Tower
- ID
- 3.5-Inch Disk Drives
- jumpering
- Jumpering SCSI Device IDs
- pins
- Jumpering SCSI Device IDs
- resetting
- Jumpering SCSI Device IDs
- See also differential, single-ended, 3.5-inch drive, 5.25-inch drive.
- Cabling the Enclosure
- scsiadminswap
- Warm Swapping Drives (Administrative Warm Swap)
- shelf for rack
- Installing the Origin Vault Enclosure in a Rack
- installing
- Installing the Mounting Shelf
- single-ended
- Cabling the Enclosure
- Single-Ended and Differential Versions (3.5-Inch Drive Controller)
- cabling
- rackmounted
- Cabling the Single-Ended 3.5-Inch Drive Controller
- tower
- Cabling the Tower
- configuration
- Configurations and Cabling for the 3.5-Inch Drive Controller
- disk module
- Single-Ended and Differential Versions (3.5-Inch Drive Controller)
- termination
- Drive Termination
- standalone tower. See Origin Vault tower.
- Features of the Origin Vault Expansion Option
- termination
- Drive Termination
- Configurations and Cabling for the 3.5-Inch Drive Controller
- Drive Controller Connectors
- Drive Controller Connectors
- terminator
- attaching
- Adding a Second Origin Vault Expansion Option (One Host)
- Cabling the Tower
- Cabling the Differential 3.5-Inch Drive Controller
- part number
- Cabling the Differential 3.5-Inch Drive Controller
- Cabling the Tower
- third-party rack
- installing Origin Vault in
- Installing the Origin Vault Enclosure in a Rack
- Preparing the Third-Party 19-Inch Rack for the Enclosure
- removing Origin Vault door
- Removing the Enclosure Door (Optional)
- tower. See Origin Vault tower.
- Features of the Origin Vault Expansion Option
- transfer rate
- Data Transfer Rates
- Ultra SCSI board
- cabling
- Cabling the 5.25-Inch Drive Controller
- Cabling the Differential 3.5-Inch Drive Controller
- SCSI channels
- Cabling the Enclosure
- warm swap
- Warm Swapping Drives (Administrative Warm Swap)
- 3.5-Inch Disk Drives