Search results

"step" will allow a user to select subsystems one by one. "keep" is used to return a subsystem to its normal state, meaning if its marked for installation it won't be ins ...

...nition — an installed-package record created by the IRIX <code>inst</code> subsystem. These files are used by <code>inst</code>, <code>versions</code>, and inte ...essed data streams comprising NUL-terminated ASCII records, which describe subsystems, components, conditions, paths, and metadata. ...

[[Category: Subsystems]] ...

[[Category:Subsystems]] ...

...odes (user, system, interrupt, etc.) with hardware-specific accuracy. This subsystem differs from Illumos/OpenSolaris in several notable ways due to differences * The subsystem provides **manual control** over timer modes and accumulators. ...

* Seven high performance 3D graphics subsystem options deliver performance and features to match any application. * High performance I/O subsystem includes four VME expansion slots, Ethernet and two SCSI channels with disk ...

...ption for SGI’s Prism and Onyx4 visualization systems,. The UltimateVision subsystem was designed to scale from a single high-performance graphics pipe to multi ...

...ting kernel object files to produce high-level, functional descriptions of subsystems, data structures, and behaviors. The documentation is intended to preserve ...urces. This namespace seeks to fill that gap by systematically documenting subsystems as they existed in IRIX 6.5, the final major release. ...

|Serial and audio subsystems ...r-capacity power supply to handle increased current draw from the graphics subsystem and additional memory. Although mechanically similar to the non-IMPACT unit ...

[[Category: IRIX Subsystems]] ...

[[Category:Subsystems]] ...

The IRIX kernel virtual memory subsystem manages physical page allocation, deallocation, and mapping for kernel use. Porting: illumos kmem/page subsystem closest; lacks exact phead coloring and large-page coalescing. ...

...te-per-second processor to memory bandwidth, and half that to the graphics subsystem. The DIMMS used are compatible with those used in the Origin 3000, Fuel, Or ...s together. Each unit has a NUMALink and an XIO port, used to link various subsystems together. ...

...ny two of its ports. One of the ports is used for the processor and memory subsystem, one is available for PCI (actually PCI-64) expansion and four are XIO slot ...IMMS, but not the later single-board version (SGI P/N 9010036). The memory subsystem has vast reserves of bandwidth that can be directly served by the Xbow rout ...

...te-per-second processor to memory bandwidth, and half that to the graphics subsystem. The DIMMS used are compatible with those used in the Origin 3000, Fuel, an ...s together. Each unit has a NUMALink and an XIO port, used to link various subsystems together. ...

...lder kernel module ipfilterd which is a part of the eoe.sw.ipgate software subsystem. In fact, IPFilter and ipfilterd are mutually exclusive. There is even a te The install components of the software base subsystem (ipfilter.sw.base) include: ...

| colspan="5" |An R4000-based Onyx using a RealityEngine2 graphics subsystem | colspan="5" |An R4000-based Onyx using a VTX graphics subsystem ...

...te-per-second processor to memory bandwidth, and half that to the graphics subsystem. The DIMMS used are compatible with those used in the Origin 3000, Fuel, an ...s together. Each unit has a NUMALink and an XIO port, used to link various subsystems together. ...

* Improved security for remote X and other subsystems (safer defaults) ...

...for load balancing, and reverse mapping for efficient invalidation. The VM subsystem integrates with IRIX's filesystem layers (e.g., XFS, EFS) for unified cachi Migr subsystem for NUMA balancing; rmap for efficient TLB shootdowns and unmaps. Pagemigr ...