SGI™ Origin 3000 Series Owner's Guide
Document Number: 007-4240-002
Front Matter
| List of Figures | List of Examples | List of Tables |
Table of Contents
- About This Guide
- Audience
- Notes, Cautions, and Warnings
- Chapter Descriptions
- Information Sources
- Conventions
- Product Support
- Reader Comments
- 1. Introducing the SGI Origin 3000 Series
- Product Description
- SGI Origin 3000 Series Models
- Server System Features
- 2. System Setup and Operation
- Connecting a Console to Your Server System
- Adding or Replacing Server System Parts
- Powering On and Off
- Monitoring Your Server
- 3. System Control
- Two Levels of System Control
- System Controller Interaction
- L1 Controller
- L2 Controller
- Using the L2 Controller Touch Display
- About the L2 Controller Firmware
- Operating L2
- Operating L1
- Upgrading L1/L2 Firmware
- Identifying Bricks
- 4. C–brick
- Functional Description
- Internal Components and Front Panel Items
- Switch, Connectors, and LEDs on C–brick Rear Panel
- 5. I–brick
- Functional Description
- Internal Components and Front Panel Items
- Switch, Connectors, Card Slots, and LEDs on I–brick Rear Panel
- PCI Card Installation
- 6. P–brick
- Functional Description
- Internal Components and Front Panel Items
- Switch, Connectors, Card Slots, and LEDs on Rear Panel
- PCI Card Description and Installation
- 7. X–brick
- Functional Description
- Internal Components and Front Panel Items
- Switch, Connectors, Card Slots, and LEDs on Rear Panel
- XIO Cards
- 8. D–brick
- D–brick Functional Description
- Disk Drive Modules, and the Front Panel and Chassis
- Operating Panel, Modules, Connectors, and LEDs on D–brick Rear Panel
- Powering the D–brick On or Off
- D–brick Bay Numbering
- Adding and Removing Disk Drive Modules
- Troubleshooting
- 9. R–brick
- Functional Description
- Internal Components and Front Panel Items
- Switch, Connectors, and LEDs on R–brick
Rear Panel
- 10. System Power
- Overview of the Power System
- Power Bay Front Panel, Internal Components, and Functional Description
- Power Bay Rear Panel Connectors and Fault Reset Switch
- Power Distribution Units (PDUs)
- Power Distribution Strips (PDSs)
- Cabling
- 11. Maintenance and Troubleshooting
- Performing
Maintenance
- Adding or Removing Disk Drive Modules
- Adding or Replacing a PCI Card
- 12. Cabling Examples
- Connectors Used to Cable the Bricks Together
- Cabling Examples
- A. Technical Specifications
- System-Level Specifications
- Brick-Level Specifications
- Power Specifications
- B. System Controller Commands
- L1 Controller Command Set
- L2 Controller Command Set
- C. Controller Status and Error Messages
- L1 Controller Messages
- L2 Controller Messages
- D. Regulatory Specifications
- Manufacturer's Regulatory Declarations
- Lithium Battery Statement
- Safety Instructions
- Index