This guide provides information on using and administering a Silicon Graphics 330 Visual Workstation.
The following topics are covered in this manual:
Chapter 1, “System Setup” describes how to prepare the system for installation and how to connect it to its peripheral devices.
Chapter 2, “Installation of Customer Replaceable Components” describes how to install customer replaceable components. This includes the removal and replacement of drives, the power supply, the fans, expansion cards, the system board, and the I/O gasket.
Chapter 3, “System Board” describes the system board and all its major components. It contains the system board layout, jumper settings, cache and memory configurations, and information on other internal devices.
Chapter 4, “Setup Utility” gives information about the system BIOS and tells how to configure the system by changing the settings of the BIOS parameters.
Chapter 5, “SCSISelect Configuration Utility” contains information about the SCSISelect Configuration Utility.
Appendix A, “Connector Pinouts” contains port pinout information for the rear panel ports.
Appendix B, “Physical Environment Specifications” details the physical environment specifications for the Silicon Graphics 330 Visual Workstation system.
Appendix C, “Regulatory Information” provides regulatory information.
To obtain SGI documentation, go to the SGI Technical Publications Library at http://techpubs.sgi.com.
If you have comments about the technical accuracy, content, or organization of this document, please tell us. Be sure to include the title and document number of the manual with your comments. (Online, the document number is located in the front matter of the manual. In printed manuals, the document number can be found on the back cover.)
You can contact us in any of the following ways:
Send e-mail to the following address:
[email protected] |
Use the Feedback option on the Technical Publications Library World Wide Web page:
Contact your customer service representative and ask that an incident be filed in the SGI incident tracking system.
Send mail to the following address:
Technical Publications
SGI
1600 Amphitheatre Pkwy., M/S 535
Mountain View, California 94043-1351
Send a fax to the attention of “Technical Publications” at +1 650 932 0801.
We value your comments and will respond to them promptly.