- Altix 3000 servers
- monitoring locations
- Monitoring Your Server
- powering off
- Powering Off the System
- powering on
- Powering On the System
- Altix 3300 server
- console configuration when no L2
- Console Hardware Requirements
- description
- SGI Altix 3300 Server System
- illustration
- SGI Altix 3300 Server System
- Altix 3700 server
- L2 Controller
- description
- SGI Altix 3700 Server System
- illustration
- SGI Altix 3700 Server System
- apropos command
- Related Publications
- audible alarm
- Operator's Panel
- battery statements
- Lithium Battery Statements
- block diagram
- system
- System Architecture
- brick
- identification
- Identifying Bricks
- monitored at L1 controller
- Monitoring Your Server
- powering off
- Powering Off the System
- powering on
- Powering On the System
- brick slot numbering
- Bay (Unit) Numbering
- cache coherency
-
Cache Coherency
- carrier module
- replacement procedure
- Installing or Replacing a D-brick2 Drive Carrier Module
- cascading
- Ethernet hubs
- L2 Controller Ports
- C-brick
- block diagram
- Overview
- features
- Overview
- front panel components
- Front Panel Components
- important notes
- Important Notes
- overview
- Overview
- port specifications
- Technical Specifications
- rear panel components
- Rear Panel Components
- technical specifications
- Technical Specifications
- CMN number
- CMN Number
- command error/timeout window
- L2 controller touch display
- Command Error/Timeout Window
- command targeting
- L1 mode
- Command Targeting
- L2 mode
- Setting Command Targeting
- connectors
- L2 controller
- L2 Controller Ports
- console
- L1 mode power off
- Powering Off at the System Console
- L1 mode power on
- Powering On at the System Console
- L2 mode power off
- Powering Off at the System Console
- L2 mode power on
- Powering On at the System Console
- powering off bricks
- Powering Off at the System Console
- powering on bricks
- Powering On at the System Console
- console communications
- Console Selection
- subchannels
- Console Selection
- console connector
- L2 controller
- L2 Controller Ports
- console mode
- from L1 mode
- Console Mode from L1
- from L2 mode
- Console Mode from L2
- console selection
- Console Selection
- Console Selection
- controller
- L1
- Two Levels of System Control
- cooling module LED
- TP900 storage module
- Cooling Module
- customer service
- Product Support
- D-brick2
- D-brick2 Technical and Environmental Specifications
- components
- D-brick2 External Components
- cooling module
- Power Supply/Cooling Modules
- drive carrier modules
- Drive Carrier Modules and “Dummy” Modules
- dummy modules
- Drive Carrier Modules and “Dummy” Modules
- features
- D-brick2 Features
- front view
- D-brick2 Overview
- LRC module
- Loop Resiliency Circuit (LRC) Modules
- overview
- D-brick2 Overview
- power supply module
- Power Supply/Cooling Modules
- powering off
- Powering Off the D-brick2
- powering on
- Powering On the D-brick2
- rear view
- D-brick2 Overview
- technical specifications
- D-brick2 Technical and Environmental Specifications
- D-brick2 components
- weight
- D-brick2 Technical and Environmental Specifications
- D-brick2 operators panel
- Operator's Panel
- destination selection window
- L2 controller touch display
- Destination Selection Window
- disk drive carrier module
- replacement procedure
- Installing or Replacing a D-brick2 Drive Carrier Module
- disk drive installation
- Installing a SCSI Disk Drive
- disk drive LED
- TP900 storage module
- Disk Drive Carrier Module
- disk drive module
- adding
- Installing a Drive Carrier Module
- antitamper lock
- disengaging
- Installing a Drive Carrier Module
- replacing
- Replacing a Drive Carrier Module
- distributed power supplies
- Distributed Power Supplies
- front view
- Distributed Power Supplies
- LEDs
- Distributed Power Supplies
- rear view
- Distributed Power Supplies
- technical specifications
- Technical Specifications
- documentation
- available via the World Wide Web
- Related Publications
- conventions
- Conventions
- man pages
- Related Publications
- drive carrier module
- antitamper lock
- disengaging
- Replacing a Drive Carrier Module
- embedded support partner (ESP)
- SGI Electronic Support
- system support
- Using Embedded Support Partner (ESP)
- environmental specifications
- Environmental Specifications
- error messages
- L1 Controller Error Messages
- ESI/ops panel module
- Two Levels of System Control
- ESP (embedded support partner)
- system support
- Using Embedded Support Partner (ESP)
- Ethernet hub
- cascading
- L2 Controller Ports
- L2 controller
- L2 Controller Ports
- Ethernet port
- L2 controller
- L2 Controller Ports
- firmware upgrade
- L1 and L2
- Upgrading L1/L2 Firmware
- front panel display
- L1 controller
- L1 Front Panel Display
- home window
- L2 controller touch display
- Powering On at the L2 Controller Touch Display
- Powering Off at the L2 Controller Touch Display
- Home Window
- hot swap disk drive replacement
- Installing or Replacing a D-brick2 Drive Carrier Module
- identifying bricks
- Identifying Bricks
- information, warning, and error message
- viewing in L1 mode
- Viewing Information, Warnings, and Error Messages
- information, warning, and error messages
- viewing in L2 mode
- Viewing Information, Warnings, and Error Messages
- install
- disk drive
- Installing a SCSI Disk Drive
- IO9 card
- Product Overview
- block diagram
- Product Overview
- location
- Product Overview
- IX-brick
- block diagram
- Product Overview
- front panel components
- Front Panel Components
- IO9 card
- Product Overview
- overview
- Product Overview
- PCI and PCI-X card slots
- PCI and PCI-X Card Configuration Guidelines
- PCI and PCI-X slot rules
- Important Installation Considerations
- PCI and PCI-X slots
- Rear Panel Components
- PCI card configuration guidelines
- PCI and PCI-X Card Configuration Guidelines
- rear panel
- Rear Panel Components
- rear panel components
- Rear Panel Components
- RT0 and RT1
- Rear Panel Components
- SCSI connector
- Rear Panel Components
- technical specifications
- PCI Card Carrier
- XIO 11 and XIO 10 connectors
- Rear Panel Components
- Knowledgebase
- SGI Electronic Support
- L1 controller
- Monitoring Your Server
- description
- L1 Controller
- error messages
- L1 Controller Error Messages
- front panel display
- L1 Front Panel Display
- front panel display items
- L1 Front Panel Display
- functions
- L1 Controller Functions
- L1 firmware
- upgrading
- Upgrading L1/L2 Firmware
- L1 firmware upgrade
- Upgrading L1 Firmware
- L1 mode
- command targeting
- Command Targeting
- from L1 software
- L1 Mode
- from L2 mode
- L1 Mode from L2
- powering off
- Powering On, Powering Off, and Resetting the Brick
- powering off at console
- Powering Off at the System Console
- powering on
- Powering On, Powering Off, and Resetting the Brick
- powering on at console
- Powering On at the System Console
- resetting the brick
- Powering On, Powering Off, and Resetting the Brick
- to console mode
- Console Mode from L1
- viewing information, warning, and error messages
- Viewing Information, Warnings, and Error Messages
- viewing system configuration
- Viewing System Configuration (from a Brick's Perspective)
- L1 ports (USB)
- L2 controller
- L2 Controller Ports
- L1 software
- modes of operation
- Operating the L1
- to L1 mode
- L1 Mode
- L2 controller
- Altix 3300 server console configuration
- Console Hardware Requirements
- connectors
- L2 Controller Ports
- console connector
- L2 Controller Ports
- description
- L2 Controller
- Ethernet hub
- L2 Controller Ports
- Ethernet port
- L2 Controller Ports
- functions performed
- L2 Controller
- interactions diagrammed
- L2 Controller
- L1 ports (USB)
- L2 Controller Ports
- LCD display connector
- L2 Controller Ports
- modem connector
- L2 Controller Ports
- ports
- L2 Controller Ports
- power connector
- L2 Controller Ports
- when required
- L2 Controller
- L2 controller power
- L2 Controller Ports
- L2 controller touch display
- Powering Off at the L2 Controller Touch Display
- L2 Controller Touch Display
- basic functions
- Using the L2 Controller Touch Display
- command error/timeout window
- Command Error/Timeout Window
- destination selection window
- Destination Selection Window
- home window
- Powering On at the L2 Controller Touch Display
- Powering Off at the L2 Controller Touch Display
- Home Window
- LCD display connector
- L2 Controller Ports
- NMI confirmation window
- NMI Confirmation Window
- power down confirmation window
- Power DOWN Confirmation Window
- power up confirmation window
- Powering On at the L2 Controller Touch Display
- Power UP Confirmation Window
- powering off bricks
- Powering Off at the L2 Controller Touch Display
- powering on bricks
- Powering On at the L2 Controller Touch Display
- reset confirmation window
- RESET Confirmation Window
- using
- Using the L2 Controller Touch Display
- L2 firmware
- upgrading
- Upgrading L1/L2 Firmware
- L2 firmware upgrade
- Upgrading L2 Firmware
- L2 mode
- from L2 software
- L2 Mode
- powering off
- Powering On, Powering Off, and Resetting the System
- powering off at console
- Powering Off at the System Console
- powering on
- Powering On, Powering Off, and Resetting the System
- powering on at console
- Powering On at the System Console
- resetting system
- Powering On, Powering Off, and Resetting the System
- setting command targeting
- Setting Command Targeting
- to console mode
- Console Mode from L2
- to L1 mode
- L1 Mode from L2
- viewing information, warning, and error messages
- Viewing Information, Warnings, and Error Messages
- viewing system configuration
- Viewing System Configuration
- L2 software
- to L2 mode
- L2 Mode
- laser compliance statements
- Laser Compliance Statements
- LED
- cooling module
- TP900 storage module
- Cooling Module
- disk drive
- power supply
- status
- lithium battery warning statements
- Safety Precautions
- Lithium Battery Statements
- modem connector
- L2 controller
- L2 Controller Ports
- modes of operation
- L1 software
- Operating the L1
- L2 operation
- Operating the L2
- monitoring
- bricks with L1 controller
- Monitoring Your Server
- embedded support partner
- Using Embedded Support Partner (ESP)
- server
- Monitoring Your Server
- NMI confirmation window
- L2 controller touch display
- NMI Confirmation Window
- non-uniform memory access (NUMA)
-
Non-uniform Memory Access (NUMA)
- numbering
- bricks in a rack
- Bay (Unit) Numbering
- racks
- Rack Numbering
- operating the L2
- Operating the L2
- PCI and PCI-X cards
- installation procedure
- Adding or Replacing a PCI or PCI–X Card
- IX-brick PCI and PCI-X slots
- Rear Panel Components
- IX-brick slot rules
- Important Installation Considerations
- PX-brick PCI and PCI-X slots
- Rear
Panel Components
- PX-brick slot rules
- Important Installation Considerations
- slots in IX-brick
- PCI and PCI-X Card Configuration Guidelines
- slots in PX-brick
- PCI and PCI–X Card Configuration Guidelines
- PCI and PCI-X slots
- IX-brick
- Rear Panel Components
- PX-brick
- Rear
Panel Components
- PCI card configuration guidelines
- IX-brick
- PCI and PCI-X Card Configuration Guidelines
- PCI cards
- cards supported
- Supported PCI Cards
- Supported PCI and PCI–X Cards
- carrier
- PCI Card Carrier
- PCI Card Carrier
- PCI carrier
- for PCI cards
- PCI Card Carrier
- PCI Card Carrier
- PCI-X cards
- cards supported
- Supported PCI Cards
- Supported PCI and PCI–X Cards
- carrier
- PCI Card Carrier
- PCI Card Carrier
- PCI-X carrier
- for PCI-X cards
- PCI Card Carrier
- PCI Card Carrier
- physical specifications
- Altix 3300 system
- Physical Specifications
- Altix 3700 system
- Physical Specifications
- pinouts
- Ethernet connector
- Ethernet Port
- SCSI connector
- External SCSI Port Connector
- serial connector
- Serial Ports
- stereo jack connector
- Stereo Jack Connector
- ports
- L2 controller
- L2 Controller Ports
- power
- connector
- TP900 storage module
- Power Supply Module
- power bay
- features
- Overview
- front panel components
- Front Panel Components
- front view
- Overview
- Front Panel Components
- overview
- Overview
- rear panel components
- Rear Panel Components
- rear view
- Overview
- Rear Panel Components
- technical specifications
- Technical Specifications
- power connector
- L2 controller
- L2 Controller Ports
- power down confirmation window
- L2 controller touch display
- Powering Off at the L2 Controller Touch Display
- Power DOWN Confirmation Window
- power specifications
- Power Specifications
- power supply LED
- TP900 storage module
- Power Supply Module
- power up confirmation window
- L2 controller touch display
- Powering On at the L2 Controller Touch Display
- Power UP Confirmation Window
- powering off
- at L2 controller touch display
- Powering Off at the L2 Controller Touch Display
- at system console
- Powering Off at the System Console
- bricks and server
- Powering Off the System
- home window
- Powering Off at the L2 Controller Touch Display
- in L1 mode
- Powering Off at the System Console
- in L2 mode
- Powering Off at the System Console
- L1 mode
- Powering On, Powering Off, and Resetting the Brick
- L2 mode
- Powering On, Powering Off, and Resetting the System
- power down confirmation window
- Powering Off at the L2 Controller Touch Display
- powering on
- at L2 controller touch display
- Powering On at the L2 Controller Touch Display
- at system console
- Powering On at the System Console
- bricks and server
- Powering On the System
- home window
- Powering On at the L2 Controller Touch Display
- in L1 mode
- Powering On at the System Console
- in L2 mode
- Powering On at the System Console
- L1 mode
- Powering On, Powering Off, and Resetting the Brick
- L2 mode
- Powering On, Powering Off, and Resetting the System
- preparation
- Preparing to
Power On
- powering up
- power up confirmation window
- Powering On at the L2 Controller Touch Display
- product support
- Product Support
- PX-brick
- block diagram
- Product Overview
- front panel components
- Front Panel Components
- overview
- Product Overview
- PCI and PCI-X card installation
- Adding or Replacing a PCI or PCI–X Card
- PCI and PCI-X card slots
- PCI and PCI–X Card Configuration Guidelines
- PCI and PCI-X slot rules
- Important Installation Considerations
- PCI and PCI-X slots
- Rear
Panel Components
- rear panel
- Rear
Panel Components
- rear panel components
- Rear
Panel Components
- Rear
Panel Components
- technical specifications
- Technical Specifications
- XIO 11 and XIO 10 connectors
- Rear
Panel Components
- racks
- overview
- Overview
- technical specifications
- Technical Specifications
- RAS features
- Reliability, Availability, and Serviceability (RAS)
- R-brick
- block diagram
- Overview
- features
- Overview
- front panel components
- Front Panel Components
- L1 control panel
- Front Panel Components
- overview
- Overview
- port specifications
- Technical Specifications
- rear panel components
- Rear Panel Components
- rear view
- Rear Panel Components
- technical specifications
- Technical Specifications
- reset confirmation window
- L2 controller touch display
- RESET Confirmation Window
- resetting system
- L1 mode
- Powering On, Powering Off, and Resetting the Brick
- L2 mode
- Powering On, Powering Off, and Resetting the System
- RT0 and RT1
- IX-brick
- Rear Panel Components
- SCSI connector
- IX-brick
- Rear Panel Components
- server
- monitoring locations
- Monitoring Your Server
- powering off
- Powering Off the System
- powering on
- Powering On the System
- SGI Knowledgebase. See Knowledgebase
- SGI Electronic Support
- short rack
- features
- Short Rack (17U)
- locking doors
- Short Rack (17U)
- status LED
- TP900 storage module
- Front Panel Components
- subchannels
- associated with console communications
- Console Selection
- support
- embedded support partner (ESP)
- Using Embedded Support Partner (ESP)
- Supportfolio Online
- SGI Electronic Support
- system architecture
- System Architecture
- system block diagram
- System Architecture
- system components
- Altix 3300 server
- System Components
- Altix 3700 server
- System Components
- list of
- System Components
- optional
- Optional System Components
- system controller
- System Control
- L2
- Two Levels of System Control
- L2 controller
- L2 Controller
- system features
- System Features
- system overview
- System Overview
- tall rack
- features
- Tall Rack (40U)
- locking front door
- Locking the Front Door
- technical specifications
- C-brick
- Technical Specifications
- distributed power supplies
- Technical Specifications
- IX-brick
- PCI Card Carrier
- power bay
- Technical Specifications
- PX-brick
- Technical Specifications
- racks
- Technical Specifications
- R-brick
- Technical Specifications
- system level
- System-level Specifications
- technical support
- Product Support
- to monitor bricks
- Monitoring Your Server
- TP900 storage module
- power connector
- Power Supply Module
- troubleshooting
- L1 controller error messages
- L1 Controller Error Messages
- problems and recommended actions
- Troubleshooting Chart
- upgrading
- L1 and L2 firmware
- Upgrading L1/L2 Firmware
- upgrading L1 firmware
- Upgrading L1 Firmware
- upgrading L2 firmware
- Upgrading L2 Firmware
- using
- L2 controller touch display
- Using the L2 Controller Touch Display
- viewing system configuration
- L1 mode
- Viewing System Configuration (from a Brick's Perspective)
- warning and error messages
- viewing in L1 mode
- Viewing Information, Warnings, and Error Messages
- warning messages
- viewing in L2 mode
- Viewing Information, Warnings, and Error Messages
- XIO 11 and XIO 10
- IX-brick
- Rear Panel Components
- PX-brick
- Rear
Panel Components