List of Figures

| Table of Contents | List of Figures | List of Tables |

Figure 1-1. Sources of Information for the Indigo2 Workstation

Figure 1-2. Workstation Owner's Guide

Figure 1-3. Software Installation Guide

Figure 1-4. IRIS InSight Icon

Figure 2-1. Indigo2 Parts

Figure 2-2. Opening the Front Cover of the Indigo2 Chassis

Figure 2-3. Removing the Front Bezel From the Indigo2 Chassis

Figure 2-4. Installing the System Disk

Figure 2-5. Installing an Option Drive

Figure 2-6. Replacing the Front Bezel on the Indigo2 Chassis

Figure 2-7. Placing the Monitor on Top of the Indigo2 Workstation

Figure 2-8. Attaching the Workstation Stand to the System

Figure 2-9. Connecting the Monitor Cable to the Indigo2 Chassis

Figure 2-10. Connecting the Keyboard Cable to the Indigo2 Chassis

Figure 2-11. Connecting the Mouse Cable to the Indigo2 Chassis

Figure 2-12. Connecting the Microphone to the Indigo2 Chassis

Figure 2-13. Ethernet AUI Port on the Back of the Indigo2 Chassis

Figure 2-14. Connecting the Standard Ethernet Cable

Figure 2-15. Attaching an Ethernet 10-BASE T Cable to the Indigo2 Chassis

Figure 2-16. Attaching the Power Cable to the Monitor

Figure 2-17. Attaching the Power Cable to the Indigo2 Chassis

Figure 2-18. Turning on the Indigo2 Workstation

Figure 2-19. Running the Power-On Diagnostics Notifier

Figure 2-20. System Startup Notifier

Figure 2-21. System is Coming Up Notifier

Figure 2-22. The Login Screen

Figure 2-23. The EZsetup Screen

Figure 2-24. Desktop Icons

Figure 2-25. CD Player Icon

Figure 2-26. The Minimized Console Window

Figure 2-27. The Toolchest

Figure 2-28. IRIS InSight Icon

Figure 2-29. Opening the Front Cover

Figure 2-30. Pressing and Releasing the Power Switch

Figure 2-31. System Power Off Notifier

Figure 2-32. The Toolchest

Figure 2-33. System Shutdown Caution Message

Figure 2-34. System Shutdown Notifier

Figure 2-35. Okay to Power Off Notifier

Figure 2-36. Starting Up the System Notifier

Figure 2-37. Installing the Lockbar

Figure 2-38. Locking the Indigo2 Workstation

Figure 3-1. Removing the Front Bezel From the Indigo2 Chassis

Figure 3-2. Removing the Top Cover From the Indigo2 Chassis

Figure 3-3. Locating the SIMM Sockets

Figure 3-4. Orienting the SIMM When Facing the Rear of the Chassis

Figure 3-5. Tilting the SIMM up to a Vertical Position

Figure 3-6. Replacing the Top Cover on the Indigo2 Chassis

Figure 3-7. Replacing the Front Bezel on the Indigo2 Chassis

Figure 3-8. System Startup Notifier

Figure 3-9. System is Coming up Notifier

Figure 3-10. Removing the Front Bezel from the Indigo2 Chassis

Figure 3-11. Removing the Top Cover From the Indigo2 Chassis

Figure 3-12. Locating the Memory SIMMs

Figure 3-13. Loosening the Screws on the 5-1/4" Drive Tray

Figure 3-14. Removing the 5-1/4" Drive Tray From the Indigo2 Chassis

Figure 3-15. Removing a SIMM

Figure 3-16. Replacing the 5-1/4" Drive Tray in the Indigo2 Chassis

Figure 3-17. Replacing the Top Cover on the Indigo2 Chassis

Figure 3-18. Replacing the Front Bezel on the Indigo2 Chassis

Figure 4-1. Removing the Front Bezel from the Indigo2 Chassis

Figure 4-2. Removing the Top Cover From the Indigo2 Chassis

Figure 4-3. Locating the EISA Slots

Figure 4-4. Opening the Metal Panel in Front of the EISA Slots

Figure 4-5. Installing the EISA Board

Figure 4-6. Closing the Metal Panel in Front of the EISA Slots

Figure 4-7. Replacing the Top Cover of the Indigo2 Chassis

Figure 4-8. Replacing the Front Bezel on the Indigo2 Chassis

Figure 4-9. Removing the Front Bezel From the Indigo2 Chassis

Figure 4-10. Removing the Top Cover From the Indigo2 Chassis

Figure 4-11. Opening the Metal Panel in Front of the Expansion Slots

Figure 4-12. Removing the EISA Board From the Indigo2 Chassis

Figure 4-13. Replacing the Top Cover on the Indigo2 Chassis

Figure 4-14. Replacing the Front Bezel on the Indigo2 Chassis

Figure 5-1. Removing the Front Bezel From the Indigo2 Chassis

Figure 5-2. Locating the Drive Slots in the Front of the Chassis

Figure 5-3. Installing an Internal Drive

Figure 5-4. Replacing the Top Cover on the Indigo2 Chassis

Figure 5-5. Replacing the Front Bezel on the Indigo2 Chassis

Figure 5-6. Removing the Terminator From the Indigo2 Workstation

Figure 5-7. Removing the Terminator From the Last Device on the Daisy-Chain

Figure 5-8. Connecting an External SCSI Device to the Indigo2 Chassis

Figure 5-9. Daisy-chaining an External SCSI Device to Another External SCSI Device

Figure 5-10. Attaching a Terminator to an External SCSI Device

Figure 5-11. Connecting the Power Cable to an External Device

Figure 5-12. CD-ROM Icon

Figure 5-13. Locating the Serial Ports on the Back of the Indigo2 Chassis

Figure 5-14. Connecting the Serial Cable to the Serial Port on the Indigo2 Workstation

Figure 5-15. Connecting an Audio Device to the Indigo2 Workstation

Figure 7-1. System Shutdown Caution Notifier

Figure 7-2. System Shutdown Notifier

Figure 7-3. Okay to Power Off Notifier

Figure 7-4. Pressing the Reset Button

Figure 7-5. Starting up the System Notifier

Figure 7-6. Confidence Tests Form

Figure 7-7. Audio Confidence Test Form

Figure 7-8. Keyboard Test

Figure 7-9. Pressing the Reset Button

Figure 7-10. System Startup Notifier

Figure 7-11. System Recovery Menu

Figure 7-12. Media Request Notifier

Figure 7-13. Enter Password Prompt

Figure 7-14. Locating the Password Jumper

Figure 7-15. Disabled Password Notifier

Figure 8-1. Removing the Front Cover From the Indigo2 Chassis

Figure 8-2. Removing the Front Bezel From the Indigo2 Chassis

Figure 8-3. Removing the Top Cover From the Indigo2 Chassis

Figure 8-4. Lowering the Metal Panel in Front of the Expansion Slots

Figure 8-5. Removing the Screws From the Metal Extension

Figure 8-6. Pulling the Board Set out of the Chassis

Figure 8-7. Replacing the Graphics Board Set

Figure 8-8. Opening the Metal Panel in Front of the Expansion Slots

Figure 8-9. Removing the Screw From the Metal Extension

Figure 8-10. Orientation of the Wrenches

Figure 8-11. Removing the XL Board From the Chassis

Figure 8-12. Replacing the XL Graphics Board in the Chassis

Figure 8-13. Loosening the Screws on the 5-1/4" Drive Tray

Figure 8-14. Removing the 5-1/4" Drive Tray From the Indigo2 Chassis

Figure 8-15. Removing the R4000 CPU Module

Figure 8-16. Removing the R4400 150 MHz CPU Module

Figure 8-17. Removing the R4400 200 MHz CPU Module

Figure 8-18. Removing the R4600 133 MHz CPU Module

Figure 8-19. Replacing the 5-1/4" Drive Tray

Figure 8-20. Removing the Power Supply Screw

Figure 8-21. Disconnecting the SCSI Cable from the 5-1/4" Drive Tray

Figure 8-22. Removing the 5-1/4" Drive Tray From the Indigo2 Chassis

Figure 8-23. Locating the Three Power Supply Cables

Figure 8-24. Moving the Power Supply Toward the Front of the Chassis

Figure 8-25. Removing the Power Supply From the Indigo2 Chassis

Figure 8-26. Connecting the Power Cable Located Close to the Disk Drives

Figure 8-27. Installing the Power Supply

Figure 8-28. Connecting the Power Cables

Figure 8-29. Loosening the Screws on the 5-1/4" Drive Tray

Figure 8-30. Removing the 5-1/4" Drive Tray

Figure 8-31. Lowering the Metal Panel in Front of the Expansion Slots

Figure 8-32. Removing the Screws From the Graphics Board Set

Figure 8-33. Removing the XZ or Extreme Graphics Board Set

Figure 8-34. Orientation of the Wrenches

Figure 8-35. Removing the XL Graphics Board

Figure 8-36. Removing the EISA Board Backplane From the Indigo2 Chassis

Figure 8-37. Removing the R4400 150 MHz CPU Module From the CPU Baseboard

Figure 8-38. Disconnecting the Cables From the CPU Baseboard

Figure 8-39. Removing the Screws From the Back of the Chassis

Figure 8-40. Installing the CPU Baseboard in the Indigo2 Chassis

Figure 8-41. Installing the R4400 150 MHz CPU Module in the Indigo2 Chassis

Figure 8-42. Installing the EISA Board Backplane in the Indigo2 Chassis

Figure 8-43. Installing the Graphics Board Set in the Indigo2 Chassis

Figure 8-44. Installing the 5-1/4" Drive Tray in the Indigo2 Chassis

Figure 8-45. Replacing the Top Cover on the Indigo2 Chassis

Figure 8-46. Replacing the Front Bezel on the Indigo2 Chassis

Figure 9-1. Basic Parameters of VDT Workstation Adjustment (Adapted From ANSI/HFS 100-1988)

Figure A-1. Serial Port Pinout Assignments

Figure A-2. Serial Port Pinout Assignments

Figure A-3. Parallel Port Pinout Assignments

Figure A-4. Ethernet 10-BASE T Port Pinout Assignments

Figure A-5. Ethernet AUI Port Pinout Assignments

Figure A-6. Keyboard Port Pinout Assignments

Figure A-7. Mouse Port Pinout Assignments

Figure A-8. SCSI Port Pinout Assignments

Figure B-1. Opening the Door on the Front of the Indigo2 Workstation

Figure B-2. Turning on the Indigo2 Workstation

Figure B-3. System Startup Notifier

Figure B-4. Keyboard Layout Form