List of Figures

| Table of Contents | List of Figures | List of Tables |

Figure 1-1. Sources of Information for the Indy Workstation

Figure 1-2. Indy Workstation Owner's Guide

Figure 1-3. IRIS InSight Icon

Figure 1-4. System Tour Icon

Figure 2-1. Indy Parts

Figure 2-2. Connecting an Ethernet AUI Cable to the Indy Workstation

Figure 2-3. Ethernet AUI Cable

Figure 2-4. Connecting an Ethernet 10-BASE T Cable to the Indy Workstation

Figure 2-5. Connecting an ISDN Cable to the Indy Workstation

Figure 2-6. The Indy Workstation Control Buttons on the Front Panel

Figure 2-7. Turning on the Indy Workstation

Figure 2-8. Running the Power-on Diagnostics Notifier

Figure 2-9. System Startup Notifier

Figure 2-10. System is Coming Up Notifier

Figure 2-11. The Login Screen

Figure 2-12. The EZsetup Screen

Figure 2-13. System Tour Icon

Figure 2-14. Desktop Icons

Figure 2-15. CD Player Icon

Figure 2-16. The Minimized Console Window

Figure 2-17. The Toolchests

Figure 2-18. IRIS InSight Icon

Figure 2-19. Connecting the IndyCam Camera Cable to the Workstation

Figure 2-20. Sliding the IndyCam Lens Cover Aside

Figure 2-21. Camera Icon

Figure 2-22. Turning Off the Indy Workstation

Figure 2-23. System Power Off Notifier

Figure 2-24. The Toolchests

Figure 2-25. System Shutdown Caution Message

Figure 2-26. System Shutdown Notifier

Figure 2-27. Okay to Power Off Notifier

Figure 2-28. Removing the Top Cover From the Indy Workstation

Figure 2-29. Replacing the Top Cover on the Indy Workstation

Figure 2-30. Attaching a Lock to the Indy Workstation

Figure 3-1. Locating the SIMM Sockets

Figure 3-2. SIMM Bank and Socket Numbers

Figure 3-3. Orienting the SIMM

Figure 3-4. Tilting Up the SIMM to a Vertical Position

Figure 3-5. The GIO Board Installed on the Right Side of the Graphics Board

Figure 3-6. System Startup Notifier

Figure 4-1. Locating the GIO Board Connectors on the Graphics Board

Figure 4-2. Removing the Screw from the GIO I/O Port Face Plate

Figure 4-3. Positioning a Single-Width Board

Figure 4-4. Positioning a Double-Width Board

Figure 4-5. Installing a Single-Width GIO Option Board

Figure 4-6. Installing a Double-Width GIO Option Board

Figure 4-7. Attaching the External Screws For a Single-Width Board

Figure 4-8. Attaching the External Screws For a Double-Width Board

Figure 5-1. Locating the Drive Bracket Above the System Drive

Figure 5-2. Removing the Drive Bracket

Figure 5-3. Connecting the SCSI Ribbon Cable and Power Cable to the Floptical or Second Hard Drive

Figure 5-4. Installing the Floptical Drive Above the System Drive

Figure 5-5. Removing the SCSI Terminator From the Indy Workstation

Figure 5-6. Connecting an External SCSI Device to the Indy Workstation

Figure 5-7. Daisy-Chaining an External SCSI Device to Another SCSI Device

Figure 5-8. Connecting a Terminator to the Last SCSI Device on the Daisy-Chain

Figure 5-9. Connecting the Power Cable to an External Device

Figure 5-10. CD-ROM Icon

Figure 5-11. Serial Ports on the Rear of the Indy Workstation

Figure 5-12. Connecting the Serial Cable to the Serial Port

Figure 5-13. Connecting an Audio Device to the Indy Workstation

Figure 5-14. Connecting a Video Device to the Indy Workstation

Figure 7-1. System Shutdown Notifier

Figure 7-2. Running the Power-on Diagnostics Notifier

Figure 7-3. System Startup Notifier

Figure 7-4. Confidence Tests Form

Figure 7-5. Audio Confidence Test Form

Figure 7-6. Keyboard Test

Figure 7-7. Pressing the Reset Button

Figure 7-8. System Startup Notifier

Figure 7-9. System Recovery Menu

Figure 7-10. Media Request Notifier

Figure 7-11. Enter Password Prompt

Figure 7-12. Locating the Password Jumper

Figure 7-13. Disabled Password Notifier

Figure 7-14. Finding Your Workstation's Serial Number

Figure 8-1. Part Number Locations

Figure 8-2. Locating the GIO Option Board

Figure 8-3. Removing the External Screws From a Single-Width Board

Figure 8-4. Removing the External Screws From a Double-Width Board

Figure 8-5. Removing the Screws From a Single-Width GIO Option Board

Figure 8-6. Removing the Screws From a Double-Width GIO Option Board

Figure 8-7. Locating the Graphics Board with GIO Option Board Installed

Figure 8-8. Removing the Screws From the Graphics Board's I/O Connector

Figure 8-9. Removing the Screws From the Graphics Board

Figure 8-10. Disconnecting the Graphics Board From the System Board

Figure 8-11. Connecting the Graphics Board to the System Board

Figure 8-12. Inserting the Screws on the Graphics Board

Figure 8-13. Replacing the Screws on the Graphics Board's I/O Connector

Figure 8-14. Removing the Screws From the X Board

Figure 8-15. Removing the Exterior Screws for the X Board

Figure 8-16. Disconnecting the X Board from the Z Board

Figure 8-17. Removing the Standoff Screws From the Z Board

Figure 8-18. Removing the Exterior Screws For the Z Board

Figure 8-19. Disconnecting the Z Board From the System Board

Figure 8-20. Locating the CPU Module

Figure 8-21. Removing the Two Screws From the CPU Module

Figure 8-22. Disconnecting the CPU Module

Figure 8-23. Installing the CPU Module

Figure 8-24. Locating the Memory SIMMs

Figure 8-25. Releasing the Latches on the SIMM

Figure 8-26. The GIO board Installed on the Right Side of the Graphics Board

Figure 8-27. Locating the Floptical or Second Hard Disk Drive

Figure 8-28. Removing the Floptical Drive

Figure 8-29. Disconnecting the Power and SCSI Cables From the Floptical Drive

Figure 8-30. Locating the Floptical Drive Installed in the Top Slot

Figure 8-31. Removing the Floptical Drive and Bracket

Figure 8-32. Disconnecting the Cables From the Floptical Disk Drive

Figure 8-33. Removing the System Disk Drive

Figure 8-34. Disconnecting the Power and SCSI Cables From the System Disk Drive

Figure 8-35. Installing the Replacement System Disk Drive

Figure 8-36. Re-installing the Floptical Drive

Figure 8-37. Locating the Power Supply

Figure 8-38. Removing the Power Supply

Figure 8-39. Installing the Power Supply

Figure 9-1. Basic Parameters of Visual Display Terminal Workstation Adjustment (Adapted From ANSI/HFS 100-1988)

Figure 9-2. VCCI Class 2 Statement for Japan

Figure A-1. Serial Port Pinout Assignment

Figure A-2. Serial Port Pinout Assignments

Figure A-3. Parallel Port Pinout Assignments

Figure A-4. Ethernet 10-BASE T Port Pinout Assignments

Figure A-5. ISDN Port Pinout Assignments

Figure A-6. Ethernet AUI Port Pinout Assignments

Figure A-7. Keyboard Port Pinout Assignments

Figure A-8. Mouse Port Pinout Assignments

Figure A-9. SCSI Port Pinout Assignments

Figure A-10. Analog Composite Video (RCA) Port Pinout Assignments

Figure A-11. Analog S-Video Port Pinout Assignments

Figure A-12. Digital Video Port Pinout Assignments

Figure A-13. Graphics Port Pinout Assignments

Figure A-14. Stereo View Port Pinout Assignments

Figure C-1. Floptical Drive Jumpers Set to SCSI Address 2

Figure D-1. Turning on the Power on the Indy Workstation

Figure D-2. System Startup Notifier

Figure D-3. Keyboard Layout Form